D-Link xStack DGS-3420 Series - Page 362

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
357
DGS-3420-28SC:admin# config dhcpv6 pool manual_binding pool1 add 2000::3
client_duid 00010006124dd5840021918d4d9f
Command: config dhcpv6 pool manual_binding pool1 add 2000::3 client_duid
00010006124dd5840021918d4d9f
success
DGS-3420-28SC:admin#
25-9 config dhcpv6 pool prefix_delegation
Description
This command is used to create a DHCPv6 prefix pool for an interface.
Format
config dhcpv6 pool prefix_delegation <pool_name 12> <ipv6networkaddr> <value 1-128>
<ipif_name 12>
Parameters
<pool_name 12> - Enter the DHCPv6 server pool name here. This name can be up to 12
characters long.
<ipv6networkaddr> - Enter the IPv6 prefix assigned to the pool here.
<value 1-128> - Enter the length of the prefix, in bits, assigned to the user from the pool here.
The value of the assigned-length argument cannot be less than the value of the prefix-length.
<ipif_name 12> - Enter the name of the IP interface used for this prefix delegation.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a DHCPv6 prefix pool prefixpool1 for interface System:
DGS-3420-28SC:admin#config dhcpv6 pool prefix_delegation prefixpool1 1111::/48 64
System
Command: config dhcpv6 pool prefix_delegation prefixpool1 1111::/48 64 System
Success.
DGS-3420-28SC:admin#
25-10 show dhcpv6 manual_binding
Description
This command will display the manual binding entries for the selected or all DHCPv6 pools.