D-Link xStack DGS-3420 Series - Page 364

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
359
Format
show dhcpv6 binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the DHCPv6 dynamic binding information on the Switch:
DGS-3420-28SC:admin# show dhcpv6 binding
Command: show dhcpv6 binding
Pool Name: net90 IPv6 Address: 3000:90:1::7
DUID : 0003000600cd14517000
Preferred(s): 120 Valid(s): 240
Pool Name: net100-2 IPv6 Address: 3000:100:1::1
DUID : 00030006001572200300
Preferred(s): 120 Valid(s): 240
Total Entries : 2
DGS-3420-28SC:admin#
25-12 clear dhcpv6 binding
Description
This command is used to clear the DHCPv6 dynamic binding information.
Format
clear dhcpv6 binding {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.