xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
376
DGS-3420-28SC:admin#enable dnsr
Command: enable dnsr
Success.
To enable cache lookup for DNS relay:
DGS-3420-28SC:admin#enable dnsr cache
Command: enable dnsr cache
Success.
To enable static table lookup for DNS relay:
DGS-3420-28SC:admin#enable dnsr static
Command: enable dnsr static
Success.
27-3 disable dnsr
Description
This command is used to disable DNS relay on the switch.
Format
disable dnsr {[cache | static]}
Parameters
cache - (Optional) Specify to disable the cache lookup for the DNS relay on the switch.
static - (Optional) Specify to disable the static table lookup for the DNS relay on the switch.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the status of DNS relay:
To Next Page
Loading...
Need help?
General