D-Link xStack DGS-3420 Series - Page 400

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
395
31-2 show eee ports
Description
This command is used to display the EEE function state on the specified port(s).
Format
show eee ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a list of ports to be displayed.
Restrictions
None.
Example
To display the EEE state:
DGS-3420-28SC:admin#show eee ports 1:1-1:6,1:9
Command: show eee ports 1:1-1:6,1:9
Port State
--------- -----------
1:1 Disabled
1:2 Enabled
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Disabled
1:9 Disabled
DGS-3420-28SC:admin#