D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
411
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add multicast MAC forwarding:
DGS-3420-28SC:admin# config multicast_fdb default 01-00-00-00-01-01 add 1-5
Command: config multicast_fdb default 01-00-00-00-01-01 add 1-5
Success.
DGS-3420-28SC:admin#
34-5 config fdb aging_time
Description
This command is used to set the age-out timer for the switch’s dynamic unicast MAC address
forwarding tables.
Format
config fdb aging_time <sec 10-1000000>
Parameters
<sec 10-1000000> - Specify the time in seconds that a dynamically learned MAC address will remain
in the switch’s MAC address forwarding table without being accessed, before being dropped from
the database. The range of the value is 10 to 1000000. The default value is 300.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure MAC address aging time:
DGS-3420-28SC:admin#config fdb aging_time 300
Command: config fdb aging_time 300
Success.
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English