D-Link xStack DGS-3420 Series - Page 421

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
416
1 default 00-26-5A-AE-CA-1C 21 Dynamic Forward
Total Entries: 2
DGS-3420-28SC:admin#
34-11 show multicast vlan_filtering_mode
Description
This command is used to display the multicast packet filtering mode configured on the VLAN.
Format
show multicast vlan_filtering_mode {[vlanid <vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specify to display the multicast filtering mode for specified VLANs indicated by the
VLAN ID list.
<vidlist> - Enter the VLAN ID list used here.
vlan - (Optional) Specify to display the multicast filtering mode for a specified VLAN indicated by
VLAN name.
<vlan_name 32> - Enter the VLAN name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To show multicast filtering mode for ports:
DGS-3420-28SC:admin#show multicast vlan_filtering_mode
Command: show multicast filtering_mode
VLAN ID/VLAN Name Multicast Filter Mode
------------------------------- -----------------------------
default forward_unregistered_groups
DGS-3420-28SC:admin#