D-Link xStack DGS-3420 Series - Page 44

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
39
DGS-3420-28SC:admin#
3-9 config 802.1x fwd_pdu ports
Description
This command is used to configure the 802.1X PDU forwarding state on specific ports of the switch.
Format
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
Parameters
<portlist> - Specify a range of ports to be configured.
all - Specify all ports.
enable - Enable the 802.1X PDU forwarding state.
disable - Disable the 802.1X PDU forwarding state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the 802.1X PDU forwarding state on ports 1 to 2:
DGS-3420-28SC:admin#config 802.1x fwd_pdu ports 1-2 enable
Command: config 802.1x fwd_pdu ports 1-2 enable
Success.
DGS-3420-28SC:admin#
3-10 config 802.1x fwd_pdu system
Description
This command is used to configure the 802.1X PDU forwarding state.
Format
config 802.1x fwd_pdu system [enable | disable]
Parameters
enable - Enable the 802.1X PDU forwarding state.
disable - Disable the 802.1X PDU forwarding state.