D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
439
Example
To configure the router port of IGMP proxy’s upstream interface:
DGS-3420-28SC:admin#config igmp_proxy upstream_if vlan default router_ports add 3
Command: config igmp_proxy upstream_if vlan default router_ports add 3
Success.
DGS-3420-28SC:admin#
38-5 show igmp_proxy
Description
This command displays IGMP proxy configuration information or group information on the switch. The
display status item means group entry is determined by whether or not the chip is inserted.
Format
show igmp_proxy {group}
Parameters
group - (Optional) Specify the group information.
Note: If the group is not specified, the IGMP proxy configuration will be displayed.
Restrictions
None.
Example
To display IGMP proxy information:
DGS-3420-28SC:admin#show igmp_proxy
Command: show igmp_proxy
IGMP Proxy Global State : Enabled
Upstream Interface
VLAN ID : 1
Dynamic Router Ports : 1-4
Static Router Ports : 5-6
Unsolicited Report Interval : 10
Source IP Address : 0.0.0.0

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English