D-Link xStack DGS-3420 Series - Page 474

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
469
Example
To add the single multicast address 225.1.1.1 and multicast range 225.1.1.10-225.1.1.20 to the IGMP
snooping multicast VLAN profile named “Knicks”:
DGS-3420-28SC:admin#config igmp_snooping multicast_vlan_group_profile Knicks add
225.1.1.1, 225.1.1.10-225.1.1.20
Command: config igmp_snooping multicast_vlan_group_profile Knicks add 225.1.1.1,
225.1.1.10-225.1.1.20
Success.
DGS-3420-28SC:admin#
40-5 delete igmp_snooping multicast_vlan_group_profile
Description
This command is used to delete an existing IGMP snooping multicast group profile on the switch.
Specify a profile name to delete it.
Format
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
Parameters
profile_name - Specify the multicast VLAN group profile name. The maximum length is 32
characters.
<profile_name 1-32> - The profile file can be up to 32 characters long.
all - Specify to delete all the profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IGMP snooping multicast group profile named “Knicks”:
DGS-3420-28SC:admin#delete igmp_snooping multicast_vlan_group_profile profile_name
Knicks
Command: delete igmp_snooping multicast_vlan_group_profile profile_name Knicks
Success.
DGS-3420-28SC:admin#