D-Link xStack DGS-3420 Series - Page 478

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
473
40-10 enable igmp_snooping multicast_vlan
Description
This command is used to enable the IGMP snooping multicast VLAN function. By default, the multicast
VLAN is disabled.
Format
enable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping multicast VLAN:
DGS-3420-28SC:admin#enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DGS-3420-28SC:admin#
40-11 disable igmp_snooping multicast_vlan
Description
This command is used to disable the IGMP snooping multicast VLAN function. By default, the
multicast VLAN is disabled.
Format
disable igmp_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.