xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
521
Example
To disable the DHCPv6 snooping function on the Switch:
DGS-3420-28SC:admin# disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
44-22 config address_binding nd_snoop ports
Description
This command is used to specify the maximum number of entries that can be learned with ND
snooping.
Format
config address_binding nd_snoop ports [<portlist> | all] max_entry [<value 1-50> | no_limit]
Parameters
ports - Specifies the list of ports used for this configuration.
<portlist> - Enter the list of ports used for this configuration here.
all - Specifies that all the ports will be usd for this configuration.
max_entry - Specifies the maximum number of entries.
<value 1-50> - Enter the maximum number of entries used here. This value must be between 1
and 50.
no_limit - Specifies that the maximum number of learned entries is unlimited.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To specify that a maximum of 10 entries can be learned by ND snooping on ports 1–3:
DGS-3420-28SC:admin# config address_binding nd_snoop ports 1-3 max_entry 10
Command: config address_binding nd_snoop ports 1-3 max_entry 10
Success.
To Next Page
Loading...
