D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
535
Example
To disable JWAC UDP filtering:
DGS-3420-28SC:admin#disable jwac udp_filtering
Command: disable jwac udp_filtering
Success.
DGS-3420-28SC:admin#
45-9 enable jwac quarantine_server_monitor
Description
This command is used to enable the JWAC quarantine server monitor. When enabled, the JWAC
switch will monitor the quarantine server to ensure the server is okay. If the switch detects no
quarantine server, it will redirect all unauthenticated HTTP accesses to the JWAC Login Page forcibly
if the redirect is enabled and the redirect destination is configured to be quarantine server.
Format
enable jwac quarantine_server_monitor
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC quarantine server monitoring:
DGS-3420-28SC:admin#enable jwac quarantine_server_monitor
Command: enable jwac quarantine_server_monitor
Success.
DGS-3420-28SC:admin#
45-10 disable jwac quarantine_server_monitor
Description
This command is used to disable JWAC quarantine server monitoring.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English