D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
553
45-31 config jwac authorization attributes
Description
This command is used to enable or disable acceptation of authorized configuration. When the
authorization is enabled for JWAC’s RADIUS, the authorized data assigned by the RADUIS server will
be accepted if the global authorization network is enabled. When the authorization is enabled for
JWAC’s local, the authorized data assigned by the local database will be accepted.
Format
config jwac authorization attributes {radius [enable | disable] | local [enable | disable]}(1)
Parameters
radius - If specified to enable, the authorized data assigned by the RADUIS server will be accepted if
the global authorization network is enabled.The default state is enabled.
enable - Specify to enable authorized data assigned by the RADUIS server to be accepted.
disable - Specify to disable authorized data assigned by the RADUIS server from being accepted.
local - If specified to enable, the authorized data assigned by the local database will be accepted if
the global authorization network is enabled. The default state is enabled.
enable - Specify to enable authorized data assigned by the local database to be accepted.
disable - Specify to disable authorized data assigned by the local database from being accepted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the configuration authorized from the local database:
DGS-3420-28SC:admin#config jwac authorization attributes local disable
Command: config jwac authorization attributes local disable
Success.
DGS-3420-28SC:admin#

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English