D-Link xStack DGS-3420 Series - Page 567

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
562
48-3 enable l2protocol_tunnel
Description
Used to enable the Layer 2 protocol tunneling function.
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-3420-28SC:admin# enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-3420-28SC:admin#
48-4 disable l2protocol_tunnel
Description
Used to disable the Layer 2 protocol tunneling function.
Format
disable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.