D-Link xStack DGS-3420 Series - Page 577

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
572
DGS-3420-28SC:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
DGS-3420-28SC:admin#
49-9 show max_mcast_group
Description
This command is used to display the maximum number of multicast groups that a port or VLAN can
join. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
Parameters
ports - Specify a range of ports to display the maximum number of multicast groups.
<portlist> - Specify a range of ports to be displayed.
vlanid - Specify the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list> - Enter the VLAN ID of the VLAN here.
ipv4 - (Optional) Specify to display the maximum number of IPv4 learned addresses.
ipv6 - (Optional) Specify to display the maximum number of IPv6 learned addresses.
Restrictions
None.
Example
To display the maximum number of multicast groups for ports 1-2:
DGS-3420-28SC:admin# show max_mcast_group ports 1-2
Command: show max_mcast_group ports 1-2
Port Max Multicast Group Number Action
----- --------------------------- ---------
1 Infinite Drop
2 Infinite Drop
Total Entries : 2
DGS-3420-28SC:admin#