D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
645
Example
To configure the router port of MLD proxy’s upstream interface:
DGS-3420-28SC:admin#config mld_proxy upstream_if vlan default router_ports add 3
Command: config mld_proxy upstream_if vlan default router_ports add 3
Success.
DGS-3420-28SC:admin#
57-5 show mld_proxy
Description
This command is used to display the MLD proxy’s configuration or group information. The display
status item means group entry is determined by whether or not the chip has been inserted.
Format
show mld_proxy {group}
Parameters
group - (Optional) Specify the group information.
Note: If the group is not specified, the MLD proxy configuration will be displayed.
Restrictions
None.
Example
To display the MLD proxy’s information:

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English