D-Link xStack DGS-3420 Series - Page 677

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
672
Example
To add the single multicast address FF1E::11 and multicast range FF1E::12-FF1E::20 to the MLD
snooping multicast VLAN profile named “Knicks”:
DGS-3420-28SC:admin#config mld_snooping multicast_vlan_group_profile Knicks add
FF1E::11, FF1E::12-FF1E::20
Command: config mld_snooping multicast_vlan_group_profile Knicks add FF1E::11,
FF1E::12-FF1E::20
Success.
DGS-3420-28SC:admin#
59-5 delete mld_snooping multicast_vlan_group_profile
Description
This command is used to delete an existing MLD snooping multicast group profile on the switch.
Specify a profile name to delete it.
Format
delete mld_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
Parameters
profile_name - Specify the multicast VLAN group profile name. The maximum length is 32
characters.
<profile_name 1-32> - Specify the multicast VLAN group profile name. The profile name can be
up to 32 characters long.
all - Specify to delete all the profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an MLD snooping multicast group profile named “Knicks”:
DGS-3420-28SC:admin#delete mld_snooping multicast_vlan_group_profile profile_name
Knicks
Command: delete mld_snooping multicast_vlan_group_profile profile_name Knicks
Success.
DGS-3420-28SC:admin#