D-Link xStack DGS-3420 Series - Page 679

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
674
Format
config mld_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name
<profile_name 1-32>
Parameters
<vlan_name 32> - Specify the name of the multicast VLAN to be configured. Each multicast VLAN is
given a name that can be up to 32 characters.
add - Specify to associate a profile to a multicast VLAN.
delete - Specify to de-associate a profile from a multicast VLAN.
profile_name - Specify the multicast VLAN profile name. The maximum length is 32 characters.
<profile_name 1-32> - Specify the multicast VLAN profile name. The profile name can be up to
32 characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add an MLD snooping profile to a multicast VLAN group with the name “v1”:
DGS-3420-28SC:admin#config mld_snooping multicast_vlan_group v1 add profile_name
channel_1
Command: config mld_snooping multicast_vlan_group v1 add profile_name channel_1
Success.
DGS-3420-28SC:admin#
59-8 show mld_snooping multicast_vlan_group
Description
This command allows group profile information for a specific multicast VLAN to be displayed.
Format
show mld_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specify the name of the group profile’s multicast VLAN to be displayed.
Restrictions
None.