D-Link xStack DGS-3420 Series - Page 681

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
676
59-10 enable mld_snooping multicast_vlan
Description
This command is used to enable the MLD snooping multicast VLAN function. By default, the multicast
VLAN is disabled.
Format
enable mld_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable MLD snooping multicast VLAN:
DGS-3420-28SC:admin#enable mld_snooping multicast_vlan
Command: enable mld_snooping multicast_vlan
Success.
DGS-3420-28SC:admin#
59-11 disable mld_snooping multicast_vlan
Description
This command is used to disable the MLD snooping multicast VLAN function. By default, the multicast
VLAN is disabled.
Format
disable mld_snooping multicast_vlan
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.