D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
688
61-6 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB entry.
Format
config nlb unicast_fdb <macaddr> [add | delete] <portlist>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be configured.
add - Specify to add the ports.
delete - Specify to delete the ports.
<portlist> - Specify a list of forwarding ports to be added or removed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB unicast FDB entry, for the product that support the VLAN information on the unicast
forwarding:
DGS-3420-28SC:admin#config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Command: config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Success.
DGS-3420-28SC:admin#
61-7 delete nlb unicast_fdb
Description
This command is used to delete the NLB unicast FDB entry.
Format
delete nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be deleted.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English