D-Link xStack DGS-3420 Series - Page 704

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
699
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To prevent SNMP traps from being sent from the switch:
DGS-3420-28SC:admin#disable snmp traps
Command: disable snmp traps
Success.
DGS-3420-28SC:admin#
62-13 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3420-28SC:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3420-28SC:admin#