D-Link xStack DGS-3420 Series - Page 716

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
711
Format
show errors ports <portlist>
Parameters
<portlist> - Specify a port or range of ports to be displayed.
Restrictions
None.
Example
To display the errors of port 3:
DGS-3420-28SC:admin#show error ports 3
Command: show error ports 3
Port Number : 3
RX Frames TX Frames
--------- ---------
CRC Error 0 Excessive Deferral 0
Undersize 0 CRC Error 0
Oversize 0 Late Collision 0
Fragment 0 Excessive Collision 0
Jabber 0 Single Collision 0
Symbol Error 0 Collision 0
Buffer Full Drop 0
ACL Drop 0
Multicast Drop 0
VLAN Ingress Drop 0
Invalid IPv6 0
STP Drop 0
Storm and FDB Discard 0
MTU Drop 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
63-3 show utilization
Description
This command is used to display real-time port utilization or CPU statistics.
Format
show utilization [ports | cpu]