D-Link xStack DGS-3420 Series - Page 72

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
67
Parameters
default – Specify to display the default method list for user login.
method_list_name - Specify the user-defined method list for user login.
<string 15> - Specify the user-defined method list for user login. The method list name can be up
to 15 characters long.
all – Specify to display all method lists for user login.
Restrictions
Only Administrator-level users can issue this command.
Example
To display a user-defined method list for user login:
DGS-3420-28SC:admin#show authen_login method_list_name login_list_1
Command: show authen_login method_list_name login_list_1
Method List Name Priority Method Name Comment
---------------- -------- --------------- ------------------
login_list_1 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 mix_1 User-defined Group
4 local Keyword
DGS-3420-28SC:admin#
4-10 create authen_enable method_list_name
Description
This command is used to create a user-defined method list of authentication methods for promoting a
user's privilege to Admin level. The maximum supported number of the enable method lists is eight.
Format
create authen_enable method_list_name <string 15>
Parameters
<string 15> - Specify the user-defined method list name.
Restrictions
Only Administrator-level users can issue this command.