D-Link xStack DGS-3420 Series - Page 740

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
735
Unique Event Notification OAMPDU TX : 0
Unique Event Notification OAMPDU RX : 0
Duplicate Event Notification OAMPDU TX: 0
Duplicate Event Notification OAMPDU RX: 0
Loopback Control OAMPDU TX : 0
Loopback Control OAMPDU RX : 0
Variable Request OAMPDU TX : 0
Variable Request OAMPDU RX : 0
Variable Response OAMPDU TX : 0
Variable Response OAMPDU RX : 0
Organization Specific OAMPDUs TX : 0
Organization Specific OAMPDUs RX : 0
Unsupported OAMPDU TX : 0
Unsupported OAMPDU RX : 0
Frames Lost Due To OAM : 0
DGS-3420-28SC:admin#
64-3 clear ethernet_oam ports
Description
This command is used to clear Ethernet OAM information.
Format
clear ethernet_oam ports [<portlist> | all] [event_log | statistics]
Parameters
<portlist> - Specify a range of Ethernet OAM ports to be cleared.
all - Specify to clear all Ethernet OAM ports.
event_log - Specify to clear Ethernet OAM event log information.
statistics - Specify to clear Ethernet OAM statistics.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear port 1 OAM statistics:
DGS-3420-28SC:admin#clear ethernet_oam ports 1 statistics
Command: clear ethernet_oam ports 1 statistics
Success.
DGS-3420-28SC:admin#