D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
72
Restrictions
Only Administrator-level users can issue this command.
Example
To display the login and enable method list for all applications:
DGS-3420-28SC:admin#show authen application
Command: show authen application
Application Login Method List Enable Method List
----------- ----------------- ------------------
Console default default
Telnet login_list_1 default
SSH default default
HTTP default default
DGS-3420-28SC:admin#
4-16 create authen server_group
Description
This command is used to create a user-defined authentication server group. The maximum supported
number of server groups including built-in server groups is eight. Each group consists of eight server
hosts as maximum.
Format
create authen server_group <string 15>
Parameters
<string 15> - Specify the user-defined server group name.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined authentication server group:
DGS-3420-28SC:admin#create authen server_group mix_1
Command: create authen server_group mix_1
Success.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English