D-Link xStack DGS-3420 Series - Page 859

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
854
Example
To configure the sFlow flow sampler parameters:
DGS-3420-28SC:admin#config sflow flow_sampler ports all rate 1
Command: config sflow flow_sampler ports all rate 1
Success.
DGS-3420-28SC:admin#
12-6 delete sflow flow_sampler ports
Description
This command is used to delete the sFlow flow sampler.
Format
delete sflow flow_sampler ports [<portlist> | all]
Parameters
<portlist> - Specify the list of ports to be deleted.
all - Specify to delete all ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the sFlow flow sampler for ports 1 to 3:
DGS-3420-28SC:admin#delete sflow flow_sampler ports 1-3
Command: delete sflow flow_sampler ports 1-3
Success.
DGS-3420-28SC:admin#
12-7 create sflow analyzer_server
Description
This command is used to create the sFlow flow sampler ports.