D-Link xStack DGS-3420 Series - Page 871

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
866
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DGS-3420-28SC:admin#
13-4 reconfig
Description
This command is used to re-Telnet to a member.
Format
reconfig [member_id <value 1-32> | exit]
Parameters
member_id - Specify the serial number of a member.
<value 1-32> - Specify the serial number of a member. The value is between 1 and 32.
exit - Specify to terminate command switch access.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To re-Telnet to a member:
DGS-3420-28SC:admin#reconfig member_id 1
Command: reconfig member_id 1
DGS-3420-28SC:admin#
Login:
13-5 config sim_group
Description
This command is used to configure group information on the switch.
Format
config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]