D-Link xStack DGS-3420 Series - Page 875

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
870
This device is updating firmware. Please wait several minutes...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Transfer Fail
3 00-07-06-05-04-04 Transfer Fail
DGS-3420-28SC:admin#
To download configuration:
DGS-3420-28SC:admin#download sim_ms configuration_from_tftp 10.55.47.1 D:\test.txt
members 1-3
Commands: download sim_ms configuration_from_tftp 10.55.47.1 D:\test.txt members 1-
3
This device is updating configuration. Please wait several minutes...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-02 Success
2 00-07-06-05-04-03 Transfer Fail
3 00-07-06-05-04-04 Connection Fail
DGS-3420-28SC:admin#
13-8 upload sim_ms
Description
This command is used to upload configuration or a log from indicated devices to a TFTP server.
Format
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> {[members
<mslist> | all ]}
Parameters
configuration_to_tftp - Specify to upload configuration to a TFTP server.
log_to_tftp - Specify to upload a log to a TFTP server.
<ipaddr> - Specify the IP address of the TFTP server.
<path_filename> - Specify the file path to store configuration or a log in the TFTP server.
members – (Optional) Specifiy the members which upload its configuration.