D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
901
Example
To show STP ports:
DGS-3420-28SC:admin#show stp ports
Command: show stp ports
MSTP Port Information
----------------------
Port Index : 1 , Hello Time: 2 /2 , Port STP : Enabled ,
External PathCost : Auto/200000 , Edge Port : False/No , P2P : Auto /Yes
Port RestrictedRole : False, Port RestrictedTCN : False
Port Forward BPDU : Disabled
MSTI Designated Bridge Internal PathCost Prio Status Role
----- ------------------ ----------------- ---- ---------- ----------
0 N/A 200000 128 Disabled Disabled
DGS-3420-28SC:admin#
16-4 show stp mst_config_id
Description
This command is used to display the three elements of the MST configuration Identification, including
Configuration Name, Revision Level, and the MST configuration Table. The default Configuration
name is the MAC address of the bridge. If two bridges have the same three elements in
mst_config_id, that means they are in the same MST region.
Format
show stp mst_config_id
Parameters
None.
Restrictions
None.
Example
Display the STP MST Config ID:
DGS-3420-28SC:admin#show stp mst_config_id
Command: show stp mst_config_id
Current MST Configuration Identification
----------------------------------------

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English