xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
922
Parameters
<ipaddr> - Specify the IPv4 address of the TFTP server.
<ipv6addr> - Specify the IPv6 address of the TFTP server.
<domain_name 255> - Enter the domain name of the TFTP server. This name can be up to 255
characters long.
src_file - Specify the path name and file name of the TFTP server. It can be a relative path name
or an absolute path name. If path name is not specified, it refers to the TFTP server path.
<path_filename 64> - Enter the source file path. This can be up to 64 characters long.
Restrictions
Only Administrator level can issue this command.
Example
To upload a SSH public key file named id_rsa_keys from TFTP server 169.168.10.100 to the switch:
DGS-3420-28SC:admin#upload ssh client_pub_key 169.168.10.100 dest_file id_rsa_keys
Command: upload ssh client_pub_key 169.168.10.100 dest_file id_rsa_keys
Connecting to server................... Done.
Upload SSH public key.................. Done.
To Next Page
Loading...
