D-Link xStack DGS-3420 Series User Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
928
session ID by the cache timeout value. The unit of argument’s value is second and its boundary is
between 60 (1 minute) and 86400 (24 hours). The default value is 600 seconds.
Format
config ssl cachetimeout <value 60-86400>
Parameters
cachetimeout - Specify the SSL cache timeout value attributes. The SSL cache timeout value must
be between 60 and 86400 seconds. The default value is 600 seconds
<value 60-86400> - Specify the SSL cache timeout value attributes. The SSL cache timeout value
must be between 60 and 86400 seconds. The default value is 600 seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an SSL cache timeout value of 60:
DGS-3420-28SC:admin# config ssl cachetimeout 60
Commands: config ssl cachetimeout 60
Success.
DGS-3420-28SC:admin#
18-7 config ssl certificate chain
Description
This command is used to specify chain of certifications on the Switch.
Format
config ssl certificate chain [default | <cert_list>]
Parameters
default - Specifies to use the all certificates to constitute the SSL certificate chain.
<cert_list> - Specifies chain of certifications on the Switch.
Restrictions
Only Administrator-level users can issue this command.

D-Link xStack DGS-3420 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3420 Series
Category	Switch
Language	English