D-Link xStack DGS-3420 Series

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
946
Example
To display the static IP multicast VLAN replication global setting:
DGS-3420-28SC:admin#show ipmc_vlan_replication
Command: show ipmc_vlan_replication
IP Multicast VLAN Replication State : Disabled
TTL : No Decrease
Source MAC Address : Replace
DGS-3420-28SC:admin#
21-9 show ipmc_vlan_replication_entry
Description
This command is used to display the IP multicast VLAN replication entry.
Format
show ipmc_vlan_replication_entry {<name 16> | hardware}
Parameters
<name 16> - (Optional) Specify the name of the IP multicast VLAN replication entry to be
displayed.
hardware - (Optional) Specify to display the (S,G) groups which are in the chipset.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display the static configuration of IP multicast VLAN replication for hardware: