D-Link xStack DGS-3420 Series - Page 954

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
949
Example
To create a subnet VLAN entry:
DGS-3420-28SC:admin#create subnet_vlan network 172.168.1.1/24 vlan v2 priority 2
Command: create subnet_vlan network 172.168.1.1/24 vlan v2 priority 2
Success.
DGS-3420-28SC:admin#
To create an IPv6 subnet VLAN entry:
DGS-3420-28SC:admin# create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2
priority 2
Command: create subnet_vlan ipv6network fe80:250:baff::0/64 vlan v2 priority 2
Success.
DGS-3420-28SC:admin#
22-2 delete subnet_vlan
Description
This command is used to delete a subnet VLAN from the switch. Users can delete a subnet VLAN
entry by IP subnet or VLAN, or delete all subnet VLAN entries.
Format
delete subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr> | vlan
<vlan_name 32> | vlanid <vidlist> | all]
Parameters
network - Specify an IPv4 network address.
<network_address> - Specify an IPv4 network address. The format is ipaddress/prefix length.
ipv6network - Specify an IPv6 network address.
<ipv6networkaddr> - Specify an IPv6 network address. The format is ipaddress/prefix length.
vlan - Specify to delete all subnet VLAN entries associated with this VLAN.
<vlan_name 32> - Specify a VLAN name. The maximum length is 32 characters.
vlanid - Specify a list of VLANs by VLAN ID.
<vidlist> - Specify the VLAN ID.
all - Specify to delete all subnet VLAN entries.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.