D-Link xStack DGS-3420 Series - Page 964

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
959
DGS-3420-28SC:admin#
24-2 show system_severity
Description
This command is used to show the severity level control for a system.
Format
show system_severity
Parameters
None.
Restrictions
None.
Example
To show the severity level control for a system:
DGS-3420-28SC:admin#show system_severity
Command: show system_severity
System Severity Trap : information(6)
System Severity Log : information(6)
DGS-3420-28SC:admin#