D-Link xStack DGS-3420 Series - Page 979

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
974
28-2 disable udp_helper
Description
This command is used to disable the UDP Helper function on the Switch.
Format
disable udp_helper
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the UDP Helper function:
DGS-3420-28SC:admin# disable udp_helper
Command: disable udp_helper
Success.
DGS-3420-28SC:admin#
28-3 config udp_helper add ipif
Description
This command is used to add a UDP Helper server address for specific interface of Switch.
Format
config udp_helper add ipif <ipif_name 12> <ipaddr>
Parameters
ipif - Specifies the name of the IP interface that receives the UDP broadcast.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
characters long.
<ipaddr> - Enter the UDP Helper server IP address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.