EasyManuals Logo

D-Link xStack DGS-3420 Series User Manual

D-Link xStack DGS-3420 Series
1117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #998 background imageLoading...
Page #998 background image
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
993
# STACK
config stacking force_master_role state disable
# DEVICE
config temperature threshold high 79
config temperature threshold low 11
config temperature trap state enable
config temperature log state enable
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
29-12 show boot_file
Description
This command is used to display the configuration file and firmware image assigned as boot up files.
Format
show boot_file
Parameters
None.
Restrictions
None.
Example
To display the configuration file and firmware image assigned as a boot up file:
DGS-3420-28SC:admin#show boot_file
Command: show boot_file
Bootup Firmware : c:/runtime.had
Bootup Configuration : c:/config.cfg
DGS-3420-28SC:admin#

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DGS-3420 Series and is the answer not in the manual?

D-Link xStack DGS-3420 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DGS-3420 Series
CategorySwitch
LanguageEnglish

Related product manuals