D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
272
Parameters
mepname - Specifies the MEP name.
<string 32> - Enter the MEP name. This name can be up to 32 characters long.
mepid - Specifies the MEP ID.
<int 1-8191> - Enter the MEP ID. This value must be between 1 and 8191.
md - Specifies the Maintenance Domain name.
<string 22> - Enter the Maintenance Domain name. This name can be up to 22 characters
long.
md_index - Specifies the Maintenance Domain index.
<uint 1-4294967295> - Enter the Maintenance Domain index. This value must be between 1
and 4294967295.
ma - Specifies the Maintenance Association name.
<string 22> - Enter the Maintenance Association name. This name can be up to 22
characters long.
ma_index - Specifies the Maintenance Association index.
<uint 1-4294967295> - Enter the Maintenance Association index.
Restrictions
None. (EI Mode Only Command)
Example
To display the frame delay measurement information.
DGS-3620-28SC:admin#show cfm dm mepname mep1
Command: show cfm dm mepname mep1
State : Enabled
DMM Tansmitted : 0
DMR Received : 0
DMM Received : 0
DMR Transmitted : 0
Period:
ID MAC Address Status Interval PCT Pri FD nanosec FDV nanosec Start
Time
--- ----------------- ------- -------- --- --- ---------- ----------- ---------
3 00-01-02-03-04-05 Running 100ms:1s 75 7 0 0 2013-01-01
18:00:00
2 00-01-02-03-04-05 Success 1s:10s 50 7 1434343 2232 2013-01-01
14:00:00
1 00-01-02-03-04-05 Failed 10s:1min 75 1 0 0 2013-01-01
12:00:00
DGS-3620-28SC:admin#
16-38 show cfm lm
Description
This command is used to show the frame loss measurement information.

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English