D-Link xStack - Page 894

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
889
Format
enable pim
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable PIM:
DGS-3620-28SC:admin# enable pim
Command: enable pim
Success.
DGS-3620-28SC:admin#
77-3 disable pim
Description
This command is used to disable PIM on the switch.
Format
disable pim
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable PIM:
DGS-3620-28SC:admin# disable pim
Command: disable pim
Success.