Daewoo Mega 500-V - Page 303

S0607080K
Page 52
Transmission and Torque Converter
(ZF 4WG-310)
3. Install two adjusting screws.
4. Line up flat gasket (Arrow) and housing
cover (Figure 57). Now, bring housing
cover using adjusting screws uniformly
against shoulder (Figure 58).
5. Preload spool and remove the cylindrical
pins (assembly aid) again.
6. Fasten housing cover using socket head
screws.
NOTE: Torque limit 5.5 Nm (4 ft lb).
Figure 57
Figure 58
Figure 59
Figure 60