Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
– 66 –
Show Shows authorized users 294
Modify Modifies user attributes 294
Web Authentication Allows authentication and access to the network when 802.1X or
Network Access authentication are infeasible or impractical
296
Configure Global Configures general protocol settings 297
Configure Interface Enables Web Authentication for individual ports 298
Network Access MAC address-based network access authentication 299
Configure Global Enables aging for authenticated MAC addresses, and sets the time
period after which a connected MAC address must be reauthenticated
301
Configure Interface 302
General Enables MAC authentication on a port; sets the maximum number of
address that can be authenticated, the guest VLAN, dynamic VLAN and
dynamic QoS
302
Link Detection Configures detection of changes in link status, and the response (i.e.,
send trap or shut down port)
304
Configure MAC Filter 305
Add Specifies MAC addresses exempt from authentication 305
Show Shows the list of exempt MAC addresses 305
Show Information Shows the authenticated MAC address list 307
HTTPS Secure HTTP 309
Configure Global Enables HTTPs, and specifies the UDP port to use 309
Copy Certificate Replaces the default secure-site certificate 310
SSH Secure Shell 312
Configure Global Configures SSH server settings 314
Configure Host Key 316
Generate Generates the host key pair (public and private) 316
Show Displays RSA and DSA host keys; deletes host keys 316
Configure User Key 317
Copy Imports user public keys from TFTP server 317
Show Displays RSA and DSA user keys; deletes user keys 317
ACL Access Control Lists 319
Configure Time Range Configures the time to apply an ACL 321
Add Specifies the name of a time range 321
Show Shows the name of configured time ranges 321
Add Rule 321
Absolute Sets exact time or time range 321
Periodic Sets a recurrent time 321
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General