111 |
ETAS ES800 System | User Guide
12.10.9 Application Examples
Digital Inputs
The digital inputs can be used for the following:
- Monitoring terminal 15 (Tl. 15, ignition on)
• Booting the module with the rising edge at Tl. 15
• Shutting down the module with the falling edge at Tl. 15
- Controlling the module by means of manual activation
• Starting the recording by means of a manual trigger
• Selecting the configuration
• Manually starting the data upload
- Measuring digital signals
• Recording status signals together with other signals
• Recording events (marks)
Digital Outputs
The digital outputs can be used for the following:
- Signaling the system status
• System status "Module booting"
• System status "Recording running"
- Activating/deactivating connected modules
• For modules that do not support the "Wake-Up" function
• For measuring setups with several masters to prevent Ethernet conflicts
- Outputting measure signals
• Monitoring measure signals and displaying range excess
• Displaying the status of the ECU
To Next Page
