48 | ES830.1 Rapid Prototyping Module
ETAS ES800 System | User Guide
6 ES830.1 Rapid Prototyping Module
This chapter contains information about the following topics:
• Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
• Rapid Prototyping of Software Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
• Connections and Control Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
• Function Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
• Switching the Rapid Prototyping Module On and Off. . . . . . . . . . . . . . . . . . . . . . 55
6.1 Overview
The ES830.1 Rapid Prototyping Module is a component in the ES800 system and is
equipped with a simulation controller for CPU-intensive rapid prototyping applica
-
tions in the development, application and validation of electronic vehicle systems.
Fig. 6-1 ES830.1 Rapid Prototyping Module
As a rapid prototyping target, the rapid prototyping of control unit functions can
be carried out on the ECU at the same time as measuring and calibration tasks. The
RTA-OSEK operating system ensures a simple transition from finished functional
prototypes to the ECU series software.
In the ES800 system, the ES830.1 satisfies the high real-time requirements for
comprehensive, CPU-intensive bypass applications with low latency periods and
enables multi-ECU and multi-controller applications in combination with one or
more simulation models.
Via the ES88x and ES89x ES800 modules, the ES830.1 module supports the ETK-
S2x (FETK operating mode), XETK and FETK control unit interfaces, the CAN, CAN
FD, FlexRay and LIN bus interfaces, and automotive Ethernet interfaces.
The ES830.1 Rapid Prototyping Module is equipped with Ethernet interfaces for
connecting a PC or for connection to further modules, and can be used in vehicles
or on test benches.
To Next Page
Loading...
