ETAS ES800 - Properties

50 | ES830.1 Rapid Prototyping Module
ETAS ES800 System | User Guide
For the bypass applications, new or modified software functions are specified by a
model and executed on the rapid prototyping system. This process is suitable for
increasing the number of existing functions. The existing functions in the ECU are
frequently computed but modified so that the input values are sent via the bypass
interface and the output values are used by the new bypass function.
6.3 Properties
The most important properties of the ES830.1 Rapid Prototyping Module at a
glance:
- High-performance, compact development and experimental platform with
high computing and simulation power thanks to the use of a fast simulation
processor
- Simple transition from finished functional prototypes to the ECU software
development through the use of the RTA-OSEK operating system
- Rapid Prototyping and Simultaneous Measuring / Calibrating via ETK and
CAN
- Integrated solid state drive (SSD) for operating system and model
- 2 Ethernet interfaces with 1000 Mbit/s for connecting a PC or for connection
to further modules:
• 1 Gigabit Ethernet connection (Host)
• 1 Gigabit Ethernet connection for compatible ETAS modules
• Automatic standby function
• Precise synchronization of all connected modules and their measuring
channels
- 4 independent USB interfaces (2 x USB 3.0, 2 x USB 2.0)
- Digital inputs and outputs ("I/O" connection)
• Status of the LEDs of the module available for external displays
• Function of the "Power" key available for external "Remote Power" key
• 4 universal digital outputs, e.g., useable as the RP model "Bypass Enable
Signal"
• 4 universal digital inputs
• Automatic activation via terminal 15 (TI.15), if this is connected at the "I/
O" connection
- Automotive-capable module that is suitable for use in the development
environment and in the vehicle on test courses.
• Adaptable to ambient conditions (temperature, EMC)
• Wide supply voltage range
• High level of mechanical stability and robustness
- Part of the ETAS Tool Suite
• Rapid prototyping of control functions using MATLAB®/Simulink®, ASCET
and C through integration in INTECRIO
• Supported by INCA, INCA-EIP, RTA-TRACE, HSP
Complete technical data for the ES830.1 module can be found in the chapter
“Technical Data” on page 140.