56 | ES830.1 Rapid Prototyping Module
ETAS ES800 System | User Guide
6.6.4 Changing between Operating States
The ES830.1 is triggered to change between operating states by conditions and
events. It can be activated, deactivated, and combined with timers in order to
delay the event in the web interface (see chapter
11.6 on page 83).
Source Selection Default Wake-Up Keep alive
GE interface Ethernet Enabled/ dis-
abled
Disabled X X
Button „Power“/ „Remote
Power“
X
Host connection X X
I/O interface
(pin 12; PSCI)
Enabled/ dis-
abled
Disabled X X
ES830.1 shut down delay Time in s X
Model running Model X
ES830.1 always on (no
standby)
Enabled/ dis-
abled
Disabled X X
NOTE
Further information can be found in the Online Help of the ES830.1 web interface.
To Next Page
Loading...
