ETAS ES800 - Additional Updates of Dual Mode Etks with HSP; Initial Update of Dual Mode Etks with HSP

136 | Applications
ETAS ES800 System | User Guide
14.6.3 Initial Update of Dual Mode ETKs with HSP
Next, the Dual Mode ETKs can be operated without any further change either in
FETK mode at the ES89x module or in standard ETK mode at ETK interfaces.
14.6.4 Additional Updates of Dual Mode ETKs with HSP
Additional updates of Dual Mode ETKs with HSP can be performed at the ES89x,
ES59x or ES910 modules.
NOTE
Dual Mode ETKs that are not yet prepared for operation at the ES89x module
must be updated
once with the HSP service software. This update of the ETKs is
possible only at the modules ES59x or ES910.
NOTE
If the power supply or the Ethernet connection is interrupted during the
described initial update of the Dual Mode ETKs, the ETK can no longer be used.
Please contact the ETAS support.
NOTE
During a firmware update, neither the voltage supply of the module and the ETK
nor the Ethernet connection to the PC may be interrupted!