ETAS ES800 - Electromagnetic Compatibility; Housing Properties; Safety; Standards and Norms

143 |
ETAS ES800 System | User Guide
16.2 Standards and Norms
16.2.1 Electromagnetic Compatibility
16.2.2 Safety
16.2.3 Housing Properties
Standard Test
IEC 61326-1 Electrical equipment for measurement,
control, and laboratory use - EMC require-
ments
ISO 7637-2:2011-03 Road vehicles - Electrical disturbances
from conduction and coupling
1)
ISO16750-2:2012-11 Road vehicles - Environmental conditions
and testing for electrical and electronic
equipment
(in conjunction with Base Module ES801.1
Test Level C)
1)
1)
: Please contact ETAS for detailed information.
WARNING
The following products are Class A equipment:
- ES820.1, ES830.1, ES882.1, ES882.2, ES886.1, ES886.2
- ES891.1, ES891.2, ES892.1, ES892.2 in the power supply range of between 28 V
and 32 V DC
- This piece of equipment may cause radio interference in living areas. In this
case, the user may be required to take appropriate measures.
Standard Test
IEC 61010-1 Safety requirements for Electrical
equipment for measurement, con-
trol, and laboratory use
Standard Test
IEC 61010-1 Temperature of the housing surface (operation, metallic
surfaces):
< +70 °C/ +158 °F at +40 °C ambient temperature
Temperature of the housing surface (operation, non-
metallic surfaces):
< +80 °C/ +168 °F at +40 °C ambient temperature
IEC 60068-2-27,
ISO 16750-3
Mechanical vibration (operation)
IEC 60068-2-27,
ISO 16750-3
Mechanical shock (transport)
IEC 60529 Degree of protection through housing (IP code): Degree
of protection IP44
IP44: ES882.x, ES886.x, ES891.x, ES892.x
IP40: ES820.1, ES830.1,