ETAS ES800 - Combination with ETAS Modules from Other Series; Properties of the ES800 System; Synchronization of ETAS Modules from Other Series at the GE Interface; Wake-Up and Sleep Functions with ETAS Modules from Other Series

27 | ES800 System
ETAS ES800 System | User Guide
3.7 Combination with ETAS Modules from other Series
If the ES800 system is extended with ES4xx/ES6xx measuring modules, with
ES5xx interface modules, with the ES930 Multi-I/O module or with the ES600.2
Ethernet switch module, additional signal types can be recorded.
The ES820.1 Drive Recorder enables the direct connection of the USB-based
ES581.4, ES582.1, ES583.1 and ES584.1 bus interface modules.
Further ETAS modules can be connected to the Drive Recorder via an ES88x/
ES89x interface module or via an ES600.2 Ethernet switch module.
Further ETAS modules can be connected to the ES830.1 Rapid Prototyping Module
via an ES88x/ ES89x interface module or via an ES600.2 Ethernet switch module.
3.7.1 "Wake-Up" and "Sleep" Functions with ETAS Modules from other
Series
The "Wake-Up" and "Sleep" functions of the ES800 modules that are performed
using ETAS modules from other series, which are connected to the "FE" interface
or via the "GE-HOST" Gigabit HOST interface of an ES600.2 module to the "GE"
interface of an ES800 module, are supported.
3.7.2 Synchronization of ETAS Modules from other Series at the "GE"
Interface
The synchronization of the ETAS modules from other series, which are connected
via the "GE-HOST" Gigabit HOST interface of an ES600.2 module to the "GE" inter-
face of an ES800 module, is supported.
3.8 Properties of the ES800 System
Other important properties of the ES800 system:
- Robust metal housing with connections on the front of the device
- Automotive-capable modules that are suitable for use in the development
environment, on the test bench and in the passenger cell of motor vehicles
on test courses.
• Adaptable to ambient conditions (temperature, EMC)
• Wide supply voltage range
• High level of mechanical stability and robustness
- Part of the ETAS Tool Suite
CAN CAN, CAN FD 5 5 5
1)
5
LIN LIN bus 1 1 1 1
FLX FlexRay 0 0 1
1)
-
6 .. 32 V DC/
7 .. 29V DC
Power supply via ES80x Base Module
1)
: Number according to configuration
Designation Function Interfaces per Module
Interface ES882.x ES886.x ES891.x ES892.x