130 | Applications
ETAS ES800 System | User Guide
14.3 ETAS Modules of other Series and ETKs in Application Setup
If you are using ETAS modules from other series in your test setup, please note the
following:
The synchronization of the ETAS modules from other series, which are connected
via the "GE-HOST" Gigabit HOST interface of an ES600.2 module to the "GE" inter
-
face of an ES800 module, is supported.
The "Wake-Up" and "Sleep" functions of the ES800 modules that are performed
using ETAS modules from other series, which are connected to the "FE" interface
or via the "GE-HOST" Gigabit HOST interface of an ES600.2 module to the "GE"
interface of an ES800 module, are supported.
Detailed information on ETAS modules and ETKs in the experimental setup, appli-
cations and technical data can be found in the product user guide.
NOTE
Please contact your ETAS partner if you need to use Automotive Ethernet cables
in areas with severe interference.
To Next Page
Loading...
