ETAS ES800 - Hardware

147 |
ETAS ES800 System | User Guide
16.8.2 Hardware
ES830.1/ ES88x/ ES89x Modules
Operating the ES830.1 / ES88x/ ES89x modules requires a PC with a free Ethernet
interface (1 Gbit/s, full duplex) with RJ-45 port. Alternatively, the modules can also
be operated with an ES820.1 Drive Recorder.
ES820.1 Drive Recorder
The ES820.1 Drive Recorder is designed for operation without a PC. The configura-
tions can be transferred to the Drive Recorder and the measurement files can be
transferred from the Drive Recorder to the PC via an Ethernet connection to the
PC.
Initializing the Modules
Deactivating the Power-Save Mode
In Control Panel / Device Manager / Network Adapter, select the network adapter
used with a double-click. On the "Power Management" tab, deactivate the option
"Allow the computer to turn off this device to save power“. Confirm your configura-
tion.
The manufacturers of the network adapters provide different names for this func-
tion.
Example:
- "Link down Power saving"
- "Allow the computer to turn off this device to save power."
NOTE
If the devices are operated in a stack, only the Ethernet interface of the lowest
module in the stack is active. Only this interface can be used for the connection
to the PC.
NOTE
It is absolutely necessary to deactivate the function for automatic switching to
power-save mode of your PC network adapter if there is no data traffic at the
Ethernet interface!