ETAS ES800 - Boot Time of the Modules Es882.X, Es886.X, Es891.X, and Es892.X; Boot Time of the Rapid Prototyping Module ES830.1; Computer Unit of the Drive Recorder ES820.1; Measurement Readiness of the Drive Recorder ES820.1

165 |
ETAS ES800 System | User Guide
16.9.12 Computer Unit of the Drive Recorder ES820.1
16.9.13 Measurement Readiness of the Drive Recorder ES820.1
16.9.14 Simulation Controller of the Rapid Prototyping Module ES830.1
16.9.15 Boot Time of the Rapid Prototyping Module ES830.1
16.9.16 Boot Time of the Modules ES882.x, ES886.x, ES891.x, and ES892.x
Processor Intel Core i5-5350U Dual-Core
RAM 4 GB RAM
Mass storage 128 GB SSD internal (operating system and
application)
Operating system Windows Embedded 7
1)
Windows 10 IoT
2)
1)
: up to INCA V7.2.19; Windows 10 IoT update with ES820.1 Service Contract
2)
: INCA V7.3.5 (SP5) and higher
Operating state Boot time/measurement readiness
1)
"On" Recording starts immediately, no delay
"Fast boot standby" (Suspend to
RAM)
Approx. 10 s
Low power standby (Suspend to
Disk)
Approx. 60 s
1)
: Depending on the boot time of the connected modules and the scale of the
experiment
Processor Intel Core i5-5350U Dual-Core
RAM 4 GB RAM
Mass storage 128 GB SSD internal (operating system)
Operating state Boot time
1)
"On" Approx. 15 s
1)
: Depending on the boot time of the connected modules
Operating state Boot time
„On“ Approx. 12 s